Install the new bulb in the reverse order of removal. So follow the procedure carefully. When the seat belt is retracted, it will always be in the emergency locking mode until it is switched to automatic locking mode by pulling it all the way out to its full length. Never use one belt for more than one person at a time and always operate the vehicle with each occupant properly restrained. An accident could damage the belt webbing of the seat belt in use. Be sure the belt retracts as snugly as possible.
Don't descend steep grades in gear with the ignition switch turned off. Always wear your seat belt and make sure all occupants are properly restrained. Owners guider, service and repair manuals The Mazda3 or Mazda 3 is a compact car C-class manufactured by Mazda. Closing the liftgate Use both hands to push the liftgate down until the lock snaps shut. The child-restraint system can be hit by a deploying air bag and moved violently backward resulting in serious injury or death to the child. If you feel unsure about jump-starting, we strongly recommend that you have a competent service technician do the work.
To deactivate the system, press the switch again. Mazda de Puerto Rico P. Press the button again to return to the previous illumination intensity. Press and hold the load button for about 2 seconds until a beep is heard. To help protect the finish from rust and. Removal To remove the head restraint, press the stop-catch release, then pull up on the head restraint.
To inspect the washer fluid level in the front reservoir, pull off the cap. In our experience, any questions, problems, or complaints regarding the operation of your Mazda or any other general service transactions are most effectively resolved by your dealer. An Authorized Mazda Dealer knows your vehicle best. If your transmitter is lost or stolen, bring all remaining transmitters to an Authorized Mazda Dealer as soon as possible for a replacement and to make the lost or stolen transmitter inoperative. Using Wrong-Sized Tires: Using any other tire size than what is specified for your Mazda page 10-7 is dangerous. All specifications and descriptions are accurate at the time of printing.
Do not use non-genuine wheels, otherwise it may not be possible to install the tire pressure sensors. Contamination of either the windshield or the blades with foreign matter can reduce wiper effectiveness. In a collision, the air bags and the front seat belt pretensioner system will not deploy and this could result in death or serious injury. If the belt does not lock the seat down tight, repeat the previous step and also this one. For vehicle equipped with the engine cover, remove the engine cover. The designated positions with seat belts on the rear seats are the safest places for children.
Install the new bulb in the reverse order of removal. If there was a subsequent collision, the air bag may not deploy which could lead to injuries. Position the outboard seat belts to the side when folding the seatbacks down. Not Securing Luggage and Cargo: Not securing cargo while driving is dangerous as it could move or be crushed during sudden braking or a collision and cause injury. In a collision, the tether strap could slide off the head restraint, and loosen the child-restraint system.
Ask your doctor for specific recommendations. Rear-Facing Child-Restraint System: Rear-facing child-restraint systems on the front seat are particularly dangerous. If your child-restraint system came equipped with a tether, that probably means it is very important to properly secure the tether for child safety, please carefully follow the child-restraint system manufacturer's instructions when installing tethers. Even with the front passenger seat weight sensors, if you must use the front passenger seat for children, seating a child in a child-restraint system on the front passenger seat under the following conditions increases the danger of the front passenger air bag deploying. Grasp the buckle and tongue. Because of this, two stations may sometimes be picked up on the same frequency at the same time. Returning Rear Seatbacks to the Upright Position: A rear seatback not fully returned and locked in the upright position is dangerous.
When blocking a wheel, place a block both in front and behind the tire. In a collision, one anchor may not be strong enough to hold two child-restraint system attachments and may break, causing serious injury or death. Only in this position can the key be removed. Contact an Authorized Mazda Dealer to have the vehicle inspected as soon as possible. Furthermore, leaning over or against the front door could block the side and curtain air bags and eliminate the advantages of supplemental protection. Chipped paint can lead to rust forming on your Mazda.